NEO-6M Ublox/u-blox GPS Module for MWC/APM 

These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play. This is NOT normally done in any other store! 

• Super Bright LED 
• BlackPlane with Standard Mk style mounting holes 45mm X 45mm 
• Blox Neo 6M Chipset 
• 38400 bps (Default) Changed to 115200bps ! 
• Output GGA, GSA and RMC frames 
• 1Hz (Default) Changed to 5Hz! 
• Permanent Configuration Retention 
• Cable included 

+ Moved LED to the Top
+ Bigger battery
+ compass on board
+ 6 pin connector for EZ connect to MEGA BLACK
+ 4 pin connector for onlyGPS use
+ 4 pin connecton for compass only use
+ GPS "PCB HOOD" for More EMI/RFI Shielding 

can use both 4 pin at once 

The GPS unit is per-configured for multiwii !! Unlike other shops send it out default settings, and yet you figure it out. 

pre tested = PLUG AND PLUG for MWC 2.1! 

MultiWii GPS assited Position Hold and RTH functions 

NEO-6M Ublox u-blox GPS Module with on-board compass HMC5883l (compass) (mag)

Description:

- Main chip:U-BLOX NEO-6M
- C/A code,1.023MHz
- Receiver Frequency:L1 [1575.42MHz]
- Locate performance
- 2D :3m(Average)
- 2D:2m(average),with WAAS
- drifting<0.02m/s
- accuracy:1us
- coordinate system:WGS-84
- max attitude height:18000
- Max speed:515m/s
- accerlaration:<4g 

Specification:
- tracking sensitivity:-161dBm
- Capture sensitivity:-148dBm
- cold start time:38s average
- Warm start time:35s average
- hot start time:1s average
- Capture time:0.1s Average
- Temperature:40 to +80
- wide power supply voltage:+3.5V~+5.5V 

Ublox GPS Module V2.0