MULTICOPTER ทั่วไป -> Mini-OSD -> New Version Minim OSD w/ shell Support MAVLINK protocol OSD ARDUPILOT MEGA OSD FOR APM, Pixhawk, CUAV Pixhack (450)

New Version Minim OSD w/ shell Support MAVLINK protocol OSD ARDUPILOT MEGA OSD FOR APM, Pixhawk, CUAV Pixhack (450)

0.00 ฿

ค่าจัดส่ง รวมค่าจัดส่งแล้ว

จำนวน :

รายละเอียดสินค้า

MinimOSD support MAVLINK protocol OSD,ARDUPILOT MEGA OSD new version

Note that the osd can only be used on the APM,cannot meet the GPS used alone,can only read mavlink protocol

If it is used alone, please put the TX RX shall be connected to the APM

If it is connected to digital are used together,take the TX not define the OSD,RX can directly

OSD, when using the camera must be first to electricity,or electricity on the OSD and the camera together,otherwise it will lead to can't detect formats to display images or OSD information

The OSD is the automatic identification of the camera video formats.But if you don't pick up camera,you can choose a spot on the back doesn't have a camera output formats.Default is N,the PAL welding on that PAL output

MinimOSD, is based on the Arduino OSD.The designed for ArduPilot MEGA and MAVlink protocol design of the flight control system

Its main part is a Arduino ATmega328 MCU and MAX7456 monochrome screen stack chips.Programming is through a FTDI compatible 6 pin connector.

It features two independent power supply and ground part of the OSD function isolation stage simulation:a 5 V part ATMEGA and OSD function of digital phase,based on FTDI cable or other 5 V source power supply;And a voltage 5 V analog phase part of the OSD function through the video/output connectors, able to handle up to + 12 V power supply input. Welding jump line, power supply and the ground two parts together, if needed.

Package including :

1 x minim osd board w/ cables