RMRC Seriously Dodo Flight Controller
ค่าจัดส่ง
รวมค่าจัดส่งแล้ว
จำนวน :
รายละเอียดสินค้า
Features:
- 8 input channels
- 8 output channels
- 3 UARTs (GPS, Telemetry, S.bus)
- 2-6s input power
- 5v output - 0.5A Max (No more external regulators to get in your way!)
- STM32F303256k
- 16mbit -> 2megabyte storage
- Barometer
- Spektrum satellite port (Connector not included)
- MPU6050 accelerometer/gyro (V2 is a MPU6000)
- 36x36mm board with 30.5mm mounting holes (Same as CC3D, Naze32)
- 5.4g
- MicroUSB socket
- Dedicated connector for WS2811-style LEDs
- Operates on Cleanflight
How To Flash Firmware:
- You do not need to jump the boot loader pins.
- Simply plug in the board to CleanFlight and follow the diagram below
- Flashing is not necessary out of the package. It is ready to use unless you need barometer which is shown below:
Until the changes have been added to CleanFlight, you will need to update with this .hex file in order to use the barometer. Use the following to make the update: (If you do not need the barometer, this is not necessary)
PR is : https://github.com/cleanflight/cleanflight/pull/975
GPL source code : https://github.com/rlehey/cleanflight
GPL source code : https://github.com/rlehey/cleanflight
ความเห็น