วิทยุ-รีโมทฯ -> Radiolink -> Radiolink R9DS

Radiolink R9DS

580.00 ฿

ค่าจัดส่ง รวมค่าจัดส่งแล้ว

จำนวน :

รายละเอียดสินค้า

RL-R9DS

R9DS, 2.4G 9channel receiver, DSSS / FHSS used for the item Radiolink AT9, AT9S and AT10.

FEATURES

- Upgraded version, antenna is improved, signal will be more stable
- Dual-way communication function
- Could send back flight data
- High sensitivity, distance up to 1.1km
- DSSS technology, reliable
- Supported S-BUS and high-voltage steering engine

SPECIFICATION

1) Channels:
9 channels: output 9 channels PWM signal, with red LED.
10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously, with blue LED.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA (input voltage: 5V)
4) Size: 43x24x15mm
5) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10 display when work with flight controller APM or PIX.
6) 4096 section precision, 0.25us per section, servo anti-shake rudder.
7) MINI receiver, just need one cable if use SBUS signal.

BIND

When you use the R9DS, you need to bind. After binding finished, you don't need to bind again in the second time use. Power on the transmitter and receiver, press and hold the binding key for one second till the red LED starts flashing. When it keeps red, it means binding is finished.

S.BUS setting

CH9 is usually used for PWM or S.BUS. The blue LED means S.BUS output and red means PWM. Short press binding key two times within one second to change output from PWM to S.BUS.

ความเห็น

สินค้า

ชิ้น

ราคารวม

0.00

ราคาจัดส่ง

0.00