เลิกใช้บอร์ดที่มีเซนเซอร์แบบเก่าๆ เปลี่ยนมาใช้ MutiWii Lite กันดีกว่าราคาพอๆกันแต่ลูกเล่นและความละเอียดสูงกว่าแน่นอน รับประกันความนิ่ง 

ด้วยบอร์ดอัพ Firmware เป็น V2.3 แล้ว และลูกค้ายังสามารถอัพเวอร์ชั่นใหม่ๆได้ตามต้องการด้วยค่ะ 

จากเวบนี้ค่ะ https://code.google.com/p/multiwii/downloads/list เราค้าขายแบบเปิดหมดค่ะไม่มีกั๊กไว้ สำหรับอัพเดทเพื่อกินค่าอัพเดทโปรแกรม กับลูกทีหลัง ที่นี้ฟรีค่ะ ทำไม่เป็นสอนให้ที่หน้าร้านกันเลย

Description:

MWC MultiWii Lite Lightweight Version 4-axis Flight Control Board QUADX. With the same program for the open source compared to KK or ACM, MWC's more stable flight performance, flight skills required for novice lower debugging process more intuitive. Dedicated MWC GUI program can easily observe the PID parameters, flight control signal input / output status, sensor / switch-state, as well as aircraft attitude and heading sensor signal state of each group, sufficient for the initial configuration of the aircraft easier.

Specification:

·Dimensions 50 mm X 50 mm
·Standard Mk style mounting holes 45mm X 45mm
·Weigh 13.5g
·SMD component design with atmega328P
·ITG3205 TRIPLE AXIS GYRO, ADXL345 ACCELEROMETER
·Design with servo output for Camera Pitch and Roll
·Separate 3.3v regulated supply for the sensors
·On board logic level converter
·All the out puts are labelled for easy identification

MWC MultiWii Lite Lightweight Version 4-axis Flight Control Board QUADX

With the same program for the open source compared to KK or ACM, MWC's more stable flight performance, flight skills required for novice lower debugging process more intuitive. Dedicated MWC GUI program can easily observe the PID parameters, flight control signal input / output status, sensor / switch-state, as well as aircraft attitude and heading sensor signal state of each group, sufficient for the initial configuration of the aircraft easier.

MultiWii Lite lightweight version supports the following aircraft models:

GIMBAL -------- PTZ stabilizer independent (non-flight control purposes)
BICOPTER ------ 2-axis aircraft Avatar
Tricopter ----- Y3 (Y-type 3-axis)
QUADP --------- 4-axis + classic mode
QUADX --------- 4-axis × mode
Y4 ------------ Y-type four-axis
Y6 ------------ Y-type 6-axis
HEX6 ---------- 6 axis + mode
HEX6X --------- 6-axis × mode
FLYING WING --- flying wing with a (non-multi-axis machine, the program is in testing phase).

Tool to connect the computer via FTDI, flight mode can be easily converted at any time.

MWC MultiWii Lite lightweight version of the hardware configuration:
· ATMEGA328P microcontroller
· ITG3205 three-axis digital gyroscope
· ADXL345 three-axis acceleration sensor

MWC above the mainstream hardware platform with a combination of commonly used, which is equivalent to Arduino Pro Mini combined with 6DOF IMU sensors, integrated flight control design makes the work more stable.

MWC Lite in addition to the necessary input / output ports, expansion port also has sensors, magnetoresistive sensors are free to install and pressure sensors. In addition Lite also set aside a variety of expansion interfaces, can be used for OSD module, LCD liquid crystal module, Bluetooth module, the data transmission module, GPS module, satellite receiver, 3-axis head and other devices.

MultiWii Lite
This is RTF multiwii controller.
·Dimensions 50 mm X 50 mm
·Standard Mk style mounting holes 45mm X 45mm
·Weigh 13.5g
·SMD component design with atmega328P
·ITG3205 TRIPLE AXIS GYRO, ADXL345 ACCELEROMETER
·Design with servo output for Camera Pitch and Roll
·Separate 3.3v regulated supply for the sensors
·On board logic level converter
·All the out puts are labelled for easy identification.

You can use FTDI Basic for easy programming.