APM Power Module 18V/90A With UBEC 5.3V/2.25A (สำหรับ Lipo 2-4S เท่านั้น) มีภาคจ่ายไฟ UBEC 5.3V ในตัว (กรณีใช้กับแบตฯ มากกว่า 4 เซล ให้ใช้รุ่นที่ไม่มี UBEC น่ะค่ะ)

===================================================

The ArduPilot Mega 2.5 Power Module is a very quick and easy way of providing the ArduPilot Mega 2.5 with a clean power supply from a LiPo battery, the power module also monitors the current consumption and battery voltage through a 6-pos cable. The ArduPilot Mega Power Module has an on-board switching regulator which supplies the output of 5.3V and at a maximum of 2.25 Amp's from Lipo batteries up to a 4S. This Power Module comes completely assembled, there is a choice of connectors, either Deans or XT60's. The Power Module comes wrapped in a clear plastic heat shrink tubing for protection. 


Specifications: 

Max input voltage: 18V 
Max current sensing: 90A 
Voltage and current measurement configured for 5V ADC 
Switching regulator outputs 5.3V and 2.25A max 
6-pos DF13 cable plugs directly to ArduPilot Mega 2.5's 'PM' connector 

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, Telemetry radio). It is not designed to power servos., use a uBec or the aircraft's own ESC/BEC for this application.